IP09CP | i3 International
Skip to main contentEnter

IP09CP PoE over Coax Extender, 1000 ft

Part No.IP09CP


  • Signal extension up to 984 ft (300 m) over coaxial cable.
  • Provides up to 90W power to a remote PoE device.
  • Power source from either a PoE switch or an external power adapter.
  • Bandwidth up to 100Mbps.
  • Supports full duplex and half duplex mode and Auto MDI/MDI-X switching.
  • Built-in 30kV ESD, 40A EFT, and 30A surge at RJ45 side.
PoE over Coax Extender accessories are sold in pairs and allow utilization of the existing coaxial cable infrastructure to connect IP PoE cameras to the PoE switches. By re-using an existing coax cable, the IP camera installation can be completed faster and more sustainably. Connect one PoE extender to the PoE camera (using a short RJ45 Cat5e/6 cable) and to the existing coax cable. Connect the second PoE extender to the other end of the coax cable and to the PoE switch (using a short RJ45 Cat5e/6 cable). Use with i3’s line of IP cameras and PoE switches. Note: Ax85 supports distances up to 328 ft (100 m) only