HR16 is an integral part of the HD-over-Coax solution offered by i3. This encoder converts analog video signal into a digital video signal. HR16 supports both analog and HD-over-coax video input signals and can utilize existing coax cable, RG59, whether you want to use existing analog or install new HD-over-coax cameras such as i3's AM42R or AM52R.
Each HD-TVI analog channel viewed through HR16 supports dual streaming: independently-configured Main and Sub-stream. HR16 supports real-time live viewing at 30 frames per second on all resolutions: 4CIF for analog cameras and 1 or 2 mega pixel for HD-TVI inputs.
In addition to the HR16 encoder, the user must also purchase the analog channel licenses, available in bundles or singly, to enable the desired number of inputs that can then be added to SRX-Pro Server. Analog Channel licensing is supported by SRX-Pro Server v.3.3.3 and above only.
SRX-Pro Server is capable of supporting up to 2 (two) HR16 encoders. no With no additional IP inputs, you can choose to connect HR16 directly to the SRX-Pro Server through a provided CAT5 network cable or through an i3-recommended Gigabit switch.
|Analog and HD analog video input||16-ch BNC interface (1.0Vp-p, 75 Ohm)|
|Supported camera types||720P/30, 720P/60, 1080P/30, CVBS|
|Audio input / Two-way audio in||1-ch, RCA (2.0 Vp-p, 1 K ohm)|
|Encoding resolution||Main stream: 1080P(non-real-time) / 720P / VGA / WD1 / 4CIF / CIF Sub-stream: WD1(non-real-time) / 4CIF(non-real-time) / CIF|
|Frame rate||Main stream: 1/16 fps ~ Real time frame rate Sub-stream: 1/16 fps ~ Real time frame rate|
|Video bitrate||32 Kbps-6 Mbps|
|Audio output||1-ch, RCA (Linear, 1K ohm)|
|Audio bitrate||64 Kbps|
|Stream type||Video, Video & Audio|
|Network protocols||TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS|
|SATA||2 SATA interfaces|
|Capacity||Up to 4 TB capacity for each disk|
|Network interface||1: 10M / 100M / 1000M self-adaptive Ethernet interface|
|Serial interface||1: standard RS-485 serial interface|
|USB port||2 X USB2.0|
|Power supply||12V DC|
|Working temperature||-10 degree C ~+55 degree C (14 degree F ~ 131 degree F)|
|Working humidity||10% ~ 90%|
|Weight (without hard disks)||approx 2Kg (4.4lb)|
|Dimensions (W X D X H)||440 X 290 X 48mm (15.0 X 11.4 X 1.9 inch)|
|Warranty||5-year parts, 1-year labor|