i3 offers a selection of cards and tags for use with the readers.
All of i3s 125 kilohertz proximity credentials may be used with the card reader. This includes clamshell and graphics-quality cards, keytags, hangtags and adhesive wafers. Read range varies with the credential type.
Badge Card, Pre-Punched in Portrait
Rugged white card -- held by hand, clip or chain. Molded base stippled finish, beveled edges. Includes slot for strap or chain portrait orientation. Accepts adhesive or laminated photo ID overlay.
Technology in Credentials:
LF (125 kHz) communications between proximity readers and credentials.
Contains a molded slot for clip-strap or ball-chain. Do not drill or punch clamshell cards.
|Technology in Credentials|
|Excitation frequency||125 kHz, transmitting and receiving|
|Read repetition rate||1 read for each presentation of the credential into the readers RF|
|Encoding for Tags and Cards|
|Code format types||Wiegand-type for general use; other types for proprietary formats|
|Code format options||Number of bits between 26 and 50 bits total. Open code formats with 26 bits and 37 bits. Reserved facility codes in special 34-bit format.|
|Application||Presentation by hand to the reader|
|Operating temperature||-31℉ to +150℉ (-35℃ to +65℃)|
|Operating humidity||0% to 95% non-condensing|
|Exposure to sunlight||Remove credentials from direct exposure to bright sunlight in a hot environment. Do not leave cards and wafers inside vehicles in hot weather|
|Size of Credentials|
|Dimension||Width x Length: 3.375 in (85.7 mm) X 2.125 in (54.0 mm)|
|Thickness||0.075 in (1.9 mm)|
|Note||Contains a molded slot for clip-strap or ball-chain. Do not drill or punch clamshell cards.|