Live Chat   Contact us  Separate images   GoToMeeting   Teamviewer   Facebook   Linkedin   Youtube


P-ALADDIN24
Portal Card Reader






Features

  • Compact size Fits on a mullion or door frame
  • Clean, slim design Matches architecture at site
  • Ready for rough usage Rugged, strong construction
  • Ready for adverse weather One-part enclosure with potting
  • Easy mounting 2 screws (supplied) for fastening
  • Special read range in a small unit Up to 5.5 inches with cards
  • Visual and audible indicators 3-color LED and beeper inside reader
  • Controllable functions in reader LED and beeper can be wired to panel
  • Easy power Connects to panels DC terminals
  • Quick wiring to host panel Basic 4-wire hook-up; 6 wires
  • maximum
  • Standard Wiegand data output Data-0 & Data-1 panel connection
  • Compatible with other readers Same interface used in other readers
  • Uniform code format Standard 26-bit plus special codes
  • No programming in reader
  • Self-testing for good operation LED & beeper indicate performance
  • High value ratio Excellent performance; modest cost


Description

Installation The card reader is designed to fit perfectly on the 1-3/4 inch standard metal door frame or window mullion. The metal compensation that is built into every card reader assures minimal loss of read range when the reader is mounted on a metal surface. The card reader also can be fastened by 2 screws on any wall or other surface. Installation may be indoors or outdoors, exposed to weather.

The card reader contains a 3-color LED and a 4 kilohertz beeper. Both LED and beeper are controlled by the reader itself, and also can be controlled externally by the host system. The LED can indicate accessgranted by the host. The beeper can be used as an alarm that prevents further card reads until the alarm condition is cleared.

Testing The reader is self-testing using its own LED and beeper, it needs no interface to a controller to assure the installer and cardholder of correct performance. The reader is also selfdiagnostic if DC power is unstable, or if electrical noise is induced in the cable, the reader resets and its LED changes to amber. Operation i3s proximity readers use a re-present mode that requires that the user remove the card from the readers field before the card can be read again. This feature eliminates multiple reads from a single presentation of the card. The reader has both Wiegand data interface for basic 4-wire connection (6 wires when all features are controlled), and also RS-232 serial interface. Code transmission from both interfaces is simultaneous.

The card reader is ready for challenging applications. The ABS plastic onepart enclosure, fully potted at the back surface with epoxy resin, stands up to physical abuse and adverse environment. Credentials All of i3s 125 kilohertz proximity credentials may be used with the card reader. This includes clamshell and graphics-quality cards, keytags, hangtags and adhesive wafers. Read range varies with the credential type.



Specifications


Operating Characteristics
Reading Distance With cards up to 5.5 inches (14 cm) (varies with credential type, voltage applied to reader, and local conditions)
Excitation Frequency Transmit and Receive - 125 kHz
Antenna Output Omni-directional low-frequency RF field Indicators (Control by Reader and Panel): LED 3 colors, red-amber-green Beeper piezo-electric, 4 kHz tone
Power Supply +5 volts to +12 volts DC 10%, linear, regulated; current rating: 100 mA or more
Communication Protocols Wiegand electrical protocol
Code Formats Determined by i3s credentials programmed with 26 bits to 50 bits
Cable (for Wiegand Interface) 4 to 6 conductors (not twisted pairs), stranded, 22 gauge, color-coded, overall 100% shielded, plastic jacket, up to 500 feet
Physical Characteristics
Dimensions 4.5 x 1.8 x 0.7 inch (11.4 x 4.5 x 1.8 cm)
Weight 4 ounces (113 g)
Material ABS 1-part enclosure, dark gray color Epoxy resin potting at rear surface
Cable (Integrated with Reader) 10 conductors, 22 gauge, 18 inches long. Overall shielded, plastic jacket
Mounting Door frame, window mullion, wall, cabinet
Environment
Operating Temperature -31℉ to 150℉ (-35℃ to 65℃)
Operating Humidity 0% to 95% non-condensing
Protection from Environment Use Lexan housing when reader must be away from view or damage
Avoiding Interference Optimize reader performance by spacing or shielding reader from neighboring readers, including reader on other side of wall at door.
Certification
ISO-9001:2000; FCC Part 15; IC; UL listed


LET'S WORK TOGETHER

GET IN TOUCH WITH US AND LEARN ABOUT
OUR LATEST TECHNOLOGY SOLUTIONS